VIDPAGE                                 Charles Petzold
Sets/displays the current video page	    Version 1.0
-------------------------------------------------------

Purpose
-------
Reports/changes the current video page.

Format
------

    VIDPAGE p

Remarks
-------
Entered without the optional p parameter, VIDPAGE
reports which video page is currently active. The
chart presented in this manual for VIDMODE shows
which video pages (p parameters, beginning with 0) can
be used in each mode.

VIDPAGE can be useful when you have material on your
screen to which you want to return later. Entering
VIDPAGE 1 activates a new screen while retaining the
contents of the default VIDPAGE 0 in memory. The
previous display can subsequently be recalled by
issuing the VIDPAGE 0 command.

Notes
-----

1. When using an alternate video page do not change
   video modes (e.g. with MODE CO80) or the previous
   display contents will be lost.

2. ANSI.SYS cannot be used with other than video
   page 0.

3. VIDPAGE was formerly called EGAPAGE
